Tankless Water Heater Repair in Las Vegas

Tankless water heater showing an error code, running lukewarm, or shutting off in the middle of a shower? Las Vegas Water Experts repairs gas tankless water heaters across Las Vegas, including Rinnai, Navien and Noritz units. We’re a family-owned company, owner Jason Miller brings 24+ years of plumbing experience, and we hold Nevada contractor license #0095727 (C-1D Plumbing). Call or text 702-577-5505. We answer 24/7.

$200 off water heaters or major repairs — limited time, ends Nov 30, 2026.

Signs Your Tankless Water Heater Needs Repair

A tankless unit heats water only when a tap is open, so most problems show up the moment you turn on the hot water. Call us if you notice any of these:

  • An error code on the display or remote. The code is the unit telling you what it found. Write it down before you reset anything, and read it to us when you call.
  • No hot water at all. The unit doesn’t fire, or it fires and then shuts down. Common causes are a gas supply problem, a failed igniter, a dirty flame rod or a venting fault.
  • Lukewarm water, or hot and cold swings. Scale on the heat exchanger, a clogged inlet filter, a flow sensor problem or a unit that’s too small for how much hot water you run at once.
  • Hot water that cuts out mid-shower. Often a low-flow problem (a clogged filter or fixture), an overheating shutdown, or a flame that won’t stay lit.
  • Low hot water pressure. Scale and debris build up in the inlet filter and the heat exchanger and choke the flow.
  • Clicking with no flame, or a loud fan. Ignition and fan problems usually come with a code, but not always.
  • Water dripping from the unit or its valves. A leaking pressure relief valve, fitting or heat exchanger needs a look before it damages the wall.
  • A unit that hasn’t been descaled in years. In Las Vegas water, that’s often the root cause behind the other symptoms on this list.

Tankless Error Codes: What They Usually Mean

Every brand uses its own codes, and the same number can mean different things on different brands. The codes fall into a few families, and knowing the family tells us where to start.

  • Ignition and flame failure. The unit tried to light and couldn’t, or the flame went out. Causes range from a closed or undersized gas line to air in the line, a weak igniter, a dirty flame rod or a venting fault.
  • Overheating. The heat exchanger or the exhaust got too hot. In Las Vegas, scale inside the heat exchanger is a common cause, along with a clogged inlet filter.
  • Air supply and venting. Something is blocking the intake or the exhaust, a vent joint has come loose, or the fan isn’t moving enough air.
  • Flow sensor and water flow. The unit isn’t reading the water flow correctly, so it won’t fire, or it shuts down at low flow.
  • Scale and maintenance alerts. Some units count operating hours or watch for scale and ask for a flush.

A few examples, straight from the manufacturers’ own guides:

  • Rinnai: code 10 is air supply or exhaust blockage, code 11 is no ignition, code 12 is flame failure, and LC (shown as LC0 to LC9 on some controllers) means scale buildup in the heat exchanger and a flush is needed. Rinnai notes that repeated LC codes will eventually lock the unit out.
  • Navien (NPE series): E003 is ignition failure, E012 is flame loss, E016 is heat exchanger overheating, E030 is exhaust overheating, E110 is abnormal air pressure, often a blocked exhaust, E439 is a flow sensor fault, and E760 is a flushing or service alarm.
  • Noritz: this uses its own code list, grouped into the same families above. Read us the code and the model number from the label, and we’ll look it up for your exact unit.

Resetting a code without fixing the cause usually brings it right back, and some codes lock the unit out after a few repeats. If you smell gas, don’t reset anything. Leave the house and call your gas company or 911 from outside, then call us.

Hard Water, Scale and Descaling

Las Vegas water is hard: typically about 16 grains per gallon (SNWA, about 280 ppm), up to about 22 grains in some residential areas. When that water is heated, the minerals come out as scale and coat the inside of the heat exchanger. Scale insulates the metal from the water, so the unit works harder, trips overheating codes, loses flow and wears out early. Tankless makers set water-quality limits in their manuals and treat scale damage as a warranty topic, so regular descaling matters here more than in most places.

A descale is a flush, not a part swap. We connect a small pump to the service valves on the unit and circulate a descaling solution through the heat exchanger, then rinse it, clean the inlet filter and check that the unit fires and holds temperature. If your unit doesn’t have service valves, we can add them so future flushes are simpler.

How often? With Las Vegas water we generally recommend a descale about once a year, more often for a busy household or a home with no softener. A water softener upstream slows the buildup a lot. Our guides on water softeners for tankless water heaters and water heater flushing go deeper.

Ignition, Gas and Venting Problems

Most no-heat calls on gas tankless units come down to gas, air or the parts that light and watch the flame.

Gas supply

A gas tankless unit needs a lot of gas for a short time. If the gas line is too small, or another gas appliance is running, the pressure can drop when the unit fires and it fails to light or loses its flame. This is common after a tank-to-tankless swap where the gas line was never upsized. We check the gas pressure at the unit while it runs, and our gas line plumber page covers upsizing.

Igniter and flame rod

The igniter lights the burner, and the flame rod confirms that it’s lit. A cracked igniter, a loose wire, or carbon or a white buildup on the flame rod can cause ignition or flame failure codes. We clean or replace these parts and check the burner for debris.

Venting and air

Tankless units push their exhaust out through vent pipe rated for that unit. A blocked termination, a separated joint, a damaged vent or a vent that’s too long can cause air supply, exhaust or flame codes. Bird nests, wasps and wind-blown debris are common culprits in the valley. Venting problems are also a safety issue, so we check the whole run, not just the unit, along with the unit’s altitude setting, which has to match the install.

Flow, Temperature and Electrical Problems

Not every fault is about the flame. A tankless unit needs a minimum flow to fire, so a clogged inlet filter, a dirty aerator or a failing mixing valve in a shower can stop it from turning on. A flow sensor that misreads, a failed thermistor or a bad circuit board can cause temperature swings or shutdowns. We test the readings, not guess, and we tell you which part failed and why before we replace anything.

Brands We Repair

  • Rinnai: diagnostics, ignition and flame faults, descaling and scale codes
  • Navien: tankless and combination units, including flushing alarms and flow faults
  • Noritz: ignition, venting and scale problems

Parts availability and warranty coverage depend on the brand, model and age of the unit. Many tankless warranties depend on correct installation and water quality, so keep your flushing records.

Repair or Replace?

Most tankless problems are repairable: an igniter, a flame rod, a sensor, a fan or a descale. Replacement starts to make sense when the heat exchanger itself is leaking or badly scaled, when parts for an older model are hard to get, or when the unit was undersized from the start and never kept up with your home. We’ll tell you plainly which way we’d go and why.

If replacement is the better call, our tankless water heater installation page covers sizing, gas lines, venting and permits. Have a tank heater instead? See water heater repair in Las Vegas for gas and electric tanks, or our water heaters and tankless page for everything we do with hot water.

What to Expect on a Repair Visit

  1. Tell us the code and the model. The code, the brand and the model number help us bring the right tools and know the unit before we arrive.
  2. Diagnose. We check the gas pressure, venting, flow, filter, igniter, flame rod and sensors, and read the unit’s fault history when it has one.
  3. Explain. You hear what failed, why it failed, and what we recommend, before any work starts.
  4. Repair and test. We fix it, run hot water at more than one fixture, and make sure the unit fires and holds temperature.
  5. Prevent the repeat. If scale or a gas line was behind the problem, we tell you what will keep it from coming back.

Where We Repair Tankless Water Heaters

We repair tankless water heaters across Las Vegas, including Summerlin, North Las Vegas, Spring Valley, Enterprise and Paradise. In Henderson? See tankless water heaters in Henderson.

Related Services

Google Reviews

What Las Vegas & Henderson Neighbors Say

5.0 on Google · 31 reviews
★★★★★

Jason was responsive, timely, very knowledgeable & came out to fix the toilet in my mother’s house, who had just passed. He was very thorough & transparent & helpful during a stressful time. Great small biz that I would highly recommend & only have handle all my plumbing/water softener needs! It takes a lot for me to trust/recommend a trade biz & this is the one👍🏼

Tracy C. · Google review · Oct 2026
★★★★★

If you’re looking for a plumbing company who cares about and delivers on quality, costs, customer satisfaction and great communication, this is the company for you. They replaced a main water line to my residence in record time and with very minimal inconvenience to me. Jason is super knowledgeable and very easy to work with. Amber responded almost immediately to any questions or concerns. I have referred them to friends and they are also very happy with their work. I would definitely recommend them for all your plumbing needs.

Mary M. · Google review · Oct 2026
★★★★★

You know the work will be done right. Jason knows his stuff! Him and his wife are very friendly, communicate well and were on top of calling my warranty company and getting the part asap. They took care of it all. Jason walked me through everything and even showed me what he was talking about so I could understand. They even worked with me on pricing seeing that I am a single mother which meant the world to me. I highly recommend them.

Dani M. · Google review · Sep 2026
★★★★★

⭐⭐⭐⭐⭐ I had a great experience with Jason at Las Vegas Water Experts! He was professional, friendly, responsive, and incredibly efficient from start to finish. He really went out of his way to make sure I was getting the best deal possible without sacrificing quality, which I really appreciated. Everything was handled quickly and professionally, and the pricing was very reasonable. It’s hard to find someone who is reliable, affordable, knowledgeable, and genuinely cares about taking care of their customers, but Jason checks all of those boxes. I would absolutely recommend Las Vegas Water Experts to anyone looking for dependable, quality service. Five stars all around!

Tiffany B. · Google review · Sep 2026
★★★★★

I only recently discovered Jason @ Water Experts and he is great. Knowledgeable and willing to explain and help. Provides a great and reliable service at reasonable cost and is also very good with communication, which is reassuring and increasingly rare with service providers nowadays. Strongly recommend.

Derek H. · Google review · Sep 2026

Frequently Asked Questions

Why is my tankless water heater not heating?

The most common causes are a gas supply problem, an ignition or flame rod fault, a blocked vent, scale in the heat exchanger, or not enough water flow for the unit to fire. Check that the gas is on and other gas appliances work, and note any code on the display. If you smell gas, leave the house and call your gas company or 911 from outside.

What does the error code on my tankless water heater mean?

It depends on the brand. On a Rinnai, code 11 means no ignition and LC means scale buildup. On a Navien NPE, E003 means ignition failure and E760 is a flushing alarm. Read us the code and the model number when you call, and we’ll tell you what it points to on your unit.

How often should a tankless water heater be descaled in Las Vegas?

We generally recommend about once a year with Las Vegas hard water, and more often in a busy household or a home without a softener. A unit that shows a scale code needs a flush now.

Is it worth repairing my tankless water heater?

Usually, yes. Igniters, flame rods, sensors, fans and scale are all repairable. Replacement makes more sense when the heat exchanger leaks, when parts for an older model are hard to get, or when the unit is too small for your home. We’ll give you a straight answer.

Which tankless brands do you repair?

We repair Rinnai, Navien and Noritz tankless water heaters. If you have a different brand, call us with the model number and we’ll tell you whether we can help.

Can I call you after hours for a tankless problem?

Yes. We answer calls 24/7 at 702-577-5505. When you call, we’ll tell you when we can be there. If the unit is leaking, close the water valve under the unit and turn off its gas while you wait.

Call for Tankless Water Heater Repair in Las Vegas

Call or text 702-577-5505 or request service online. We answer 24/7. Licensed in Nevada (#0095727, C-1D), family-owned, with 24+ years of plumbing experience.